1st Floor, 175 Collins Street, Melbourne, Victoria 3000 Australia
(03) 9017 0473
ABN 79 137 904 235
Contact us to find out more about the Kremford Ready to use Stepper Motor Hobby Kitand how it can assist your application...
Kremford Ready To Use Stepper Motor Hobby Kit
The Kremford Ready To Use Stepper Motor Hobby Kit has all parts pre-connected and ready to use. The Hyperdrive is pre-loaded with a simple program that will cycle the motor in both directions. Just a few steps will get you going:Connect the USB lead to your PC or laptop Install a terminal program such as TeraTerm and connect it to the USB port at 9600 baudPlug the power supply into your 240V household powerWhen you see the Hyperdrive sign-on message, just type GOYou can download sample programs from the CD or use your own easy to write programs. Full instructions are in the Hyperdrive-3 User Manual(.pdf format).The Kit Includes:A Hyperdrive-3 with built-in stepper motor driver, controller and PLCA USB interface cable to connect the Hyperdrive to your computerA powerful stepping motor, 3.6Amp, 1.2 NM holding torqueA 24 volt 3.4 amp power supplySample programs. Kremford can assist with custom programs on request.Comprehensive instructions, wiring diagrams and manual on CD
The controller is the Hyperdrive-3, which is not only a stepper motor driver, but also a programmable logic controller. Full specifications and documentation are available elsewhere on this site.
The Motor Specifications:
Click any image to enlarge
The Power Supply Specifications:
The supplied power is a MeanWell HLG-80H-24 IP67 rated at 82W, 24V. The supply is fully enclosed and rated to IP67 and comes fitted with a standard Australian 1.8 m power cord. Cooling is by convection and the circuitry is fully potted. The IP67 rating is suitable for outdoor use. The DC output includes a 300 mm dual core cable.
Universal AC input / Full range (up to 305 VAC)Built-in active PFC functionProtections: Short circuit / Over current / Over voltage / Over temperatureCooling by free air convectionIP67 design for indoor or outdoor installationsClass 2 power unitSuitable for dry, damp or wet locations5 years warranty (subject to warranty statement)Specifications:
Constant current region
0 to 3.4 A
14.4 to 24 VDC
90 to 305 VAC or 127 to 431 VDC
357.8 khours min
195.6 x 61.5 x 38.8 (plus cables)
Hyperdrive-3:$698.00 *Interface cable to connect to the computer:$27.00 *Stepping Motor:$119.00 *24 volt 3.4 amp Power Supply with Australian Wall Plug:$190.00 *Total Stepper Motor Hobby Kit: $1034.00 ** All prices include GST & postage anywhere in Australia with tracking number